Garmin Bike Speed Sensor 2 and Cadence Sensor 2 Bundle
Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes.
The Speed Sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge® cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit.
The Cadence Sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training.
Erénye a gravitációs mérésnek, hogy
- megindulásnál is pontos mérés
- nincs mozgó alkatrész
- kevesebb az alkatrész
- kisebb a súly
- nagyon védve van a sebesség szenzor
- vízállóak (1ATM)
- üzemidejük 300 munkaóra
- cserélhető elemes
Send live speed, distance and cadence data to compatible training apps or displays by using ANT+® connectivity and Bluetooth® Low Energy technology. With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.
Replacing the Speed Sensor Battery
The sensor uses a CR2032 battery. The LED flashes red to indicate a low battery level after two rotations.
- Locate the circular battery cover on the front of the sensor.
- Rotate the cover counterclockwise until it is loose enough to remove.
- Remove the cover and the battery.
- Wait 30 seconds.
- Insert the new battery into the cover, observing the correct polarity. NOTE: Do not damage or lose the O-ring gasket.
- Rotate the cover clockwise until the marker on the cover aligns with the marker on the housing. NOTE: After replacing the battery, the LED flashes red and green for a few seconds. When the LED flashes green and then stops flashing, the device is active and ready to send data.
